what's going on YouTube do a little help
video here for anybody using X Prive
baby kit a little issue I ran into using
this mod was when I would install a new
coil I wouldn't get a prompt screen like
you would when you first unbox this and
prime your coil and put everything
together I wasn't getting a prompt
screen for the UM setting your
resistance value now when you put your
first coil in it'll prompt a screen let
me just show you what I'm talking about
here okay if we back it off it'll go all
the way to zero if we start screwing it
in with a new coil it should give you
this new or old screen and you can
select using the buttons you know the
left to right to select whether you want
the home setting to be at the old coil
resistance or the new one now that
wasn't all the way screwed in but as you
see there it changed so if I hold down
the fire button on whatever oh my select
that resets my owns when I would put a
new coil in I couldn't get to go to 0.40
to like the first couple coils so a dog
and dog I couldn't find a good video
that explained this so I figured I'd
make one help anybody out using this
same mod and tank kit so basically all
you have to do is loosen this up to
where you get zero ohms screw it back in
and before you get all the way down hit
the fire button once and it should bring
up that prompt screen and then you can
select new or old with the left
the right button and to select it to
reset the resistance value you have to
hold down your fire key so let's let's
do this one more time I'm at 4.40 5 ohms
so basically what you do is loosen this
up till it gets the zero start screwing
back in and right before you get all the
way down just where you get snug hit
that fire key select left or right or
whatever you want to set it to hold down
and your ohms are reset to a better
lower resistance value so your coils
will last hopefully this video held this
kind of stumbled me up for a few days
and I was thinking that maybe mod
malfunctions or coils you know being
manufactured not to spec every single
time but as you use a coil your
resistance will go up so when you put a
new coil in you can get this to reset
because what was happening is I would
put a new coil in three days later my
cool be burnt up because I wasn't
getting the correct or low resistance
that these coils should have
so hopefully the video helped you guys
comment like subscribe I try to come out
with you know any help videos that that
I run into and I can't find on the
internet so far not a bad little Mon big
clouds a lot of flavor hopefully this
helps thanks