let me show you two ways how you can
factory reset
your amazon fire hd 10 this is the 2021
model i just got it okay
so there's two ways to do it okay the
first way you can do a uh
soft reset the other way is a hard reset
soft reset is going into settings hard
reset is actually
using the uh the physical hard buttons
okay so first way soft reset
uh you can go just go directly into your
settings
and then from here you want to go to
device options so just scroll all the
way down
and third one to the bottom it should
say device options okay
let's go ahead and tap on that now now
you also have backup and restore you can
backup and restore
and then you can do the factory reset as
well okay just fyi
but the factory reset is right here so
we can tap on that put in your pin or
password and let it do its thing okay
now the other way to do it um the hard
reset using the hard keys here first
thing you got to do is go ahead and turn
off
um turn it off so we're going to go
ahead and turn it off
power off right here wait till it's
completely down
now next thing i'm gonna do is while
it's off i'm gonna press and hold the
power button and up button okay
volume up volume up is closer to is next
to the power button okay
so power volume press and hold
button the same time ready one two three
press and hold both buttons do not let
go until we see the amazon logo up here
i'm still holding on both buttons here
still holding amazon logo you can go
ahead and let go right here and this
will
take us into the android recovery menu
as you can see right here and you can
see we have the option to
white data slash factory reset to move
up or down use the volume rockers okay
so we're gonna go to wipe data slash
factory reset to select it
press on the power button okay now are
you sure you want to do this because
once you do this it's not going to it
cannot be undone you're going to lose
all your information okay
you want to proceed you want to
highlight yes so use the volume rockers
we're going to go down and then we're
going to go ahead and tap on the power
button right here
and as soon as i do that you can see
down here
it's formatting white data complete
okay now it's complete now i'm going to
go ahead and reboot system now it's
already highlighted
just go ahead and reboot now just like
that and give it one second once it
boots back
up it should be as if we just bought
this bad boy brand new and you have to
start off with the initial
setup process so give us one second
there you go it was stuck on the fire
logo for like a minute
but here you go beginning stages so
pretty simple
any questions or issues uh just comment
below all right
good luck i'll see you on the next one
bye