all right we got here's the Anderson
door and want to put the lock together
there's a lock mechanism here's the lock
with the keys the door handles and the
screws we're gonna go over how to
install this unlock I so we're gonna go
with this if this is put on the wrong
way but you gotta do is take the screw
out and then this'll turn but this
should be facing so when it goes to
close its going to latch so the first
thing you gonna do just slide this in
here walk in here once you get that you
get one of these little pointy screw
ones
[Applause]
just get it started
don't you do is you get the lock
mechanism slide back you get that you
have a long school and it's got the
little taper head right in here and wind
that up too
once that threads up put that in there a
little screw that's 21 that one there on
the bottom don't fully tighten it just
yet you're gonna have the front cover
and it's gonna say Anderson on that's
how you know which one it is that just
slides right in here then you get the
door handle
put that up close on you before you put
the door handle in
there's these little washers rubber
washers and corn the door handle put
that in there like the washer then
you're gonna put this back plate but
this back plate has a little lever thing
there it's got to line up with the lock
mechanism there
get that like sub done you get the rear
handle put this little comfort then on
here real rubber gasket put this on here
like so then the kit brings an allen
wrench you just tighten up the back and
what you do is you take these two screws
you get two screws
[Music]
[Applause]
[Music]
tighten the squeeze and that's it we've
done basically gonna tighten up this up
Allen Lynch part right back here
[Applause]
and that'll keep the handles in there
your walk and you're pretty much done so
it's real quick and easy it's basically
how you put the store on the latch on
the door got the key also there's a
little latch here and what this latch is
if you have to remove the glass what
happens is you pull this up and you go
up it keeps the handle up and then the
glass can slide out that's what this
little latch is on therefore a lot of
people don't know what that latches for
but it's just to pull the door handles
up so the glass could come out if you
have to take it out to replace it as you
put it down that's it and then come back
up unless you pull this latch up and
then it locks in there in place quick
and easy if you have any questions
comment below and let me know