so first you'll actually pull your stove
out unplug it make sure it's unplugged
there's no power to it pull it out turn
around so you can actually get to it
stoves are very light when you're
actually get them out and then plug so
you can move around a piece once you get
at that point then you're actually going
to remove some screws along through here
here and along the other side and
there's two more in the bottom I've
already removed those except for this
one and I will show you how to get this
back panel off this room this is just a
regular screwdriver that you can
actually fit a bit in to take the screws
out you pull up on it pull out and then
slides down and it actually opens up the
back of the stove okay this is your
locking mechanism for your door okay so
yeah it's got a rod that comes through
so it's in the lock position right now
because you can't open your door so what
you need to do is take these screws out
they're the same as the other ones that
you just took out of it the panel on the
back side
but that to the side and what you want
to do now is grab this pull out on as
far as you can and then you'll take it
off of there okay you can hold it in
your hand or let it fall there's no
electricity connected to it and then
this is actually the locking rod so
you'll take this rod and push it forward
and your door is unlocked now to get
this back into the position where it
needs to be so you can hook this back up
to the to the rod so you can use your
stuff cleaning of it then you need to
remove this Philips head screw right
there this looks like a Phillips head
bit then I have left here put it back in
our screwdriver
take a screw out there make sure to keep
this screw separate from all the other
ones or you can put them together this
is just the only one like it okay see
this has a little limit stretch on it so
you will want to take this off of here
and it see it has a little key way in it
so you'll want to turn this 180 degrees
around make sure the limit switches
inside of it I'm going to push it over
with your finger and then you'll push it
back down what you want to do then is
put the screw back yet
like so and then you're real then you
will go backwards in the steps that you
just did you'll put this back on you
will connect it to the rod you can pull
the rod back out so you connect it to
this
just like that
and if you wanted to test your door now
you could actually walk around make sure
that it's unlocked
and now you just go backwards from what
you just did and put your oven back
together
these screws that go back in here
they're just hand tight you're not
really wanting to tighten them down
really really tight
just a normal snag nothing real crazy
that is sheet metal screws
that's it your oven door is fixed you
put everything back together the way it
came apart and then you plug it back in
and your ovens ready to use again thank
y'all for joining me today it looks like
your wife needs to clean the back of the
oven Oh