So, you have stayed in a hotel room that has one of these type of air
conditioners. They're very common and the problem that you would like to solve
today is to get the fan to run all the time so that the white noise from the
fan masks any talking or noise outside stuff like that. Now, the problem is the
fan is not running. If you look right now the fan is set on high. That doesn't make
it run. Nothing you do with this button makes the fan run, so, to fix that we're
going to go into the super secret configuration menus and here's how you
do that. You're going to hold down these plus and minus buttons at the same time
and then press off twice now this gets you into configuration mode and then you
press Heat now you see C1 there and zero and what that is telling you...
it's going to flash back and forth... that is telling you that configuration item
number one, whatever that is, is in state zero press heat again you go to
configuration item number two. Now configuration item number two is the fan
and Au is automatic so to change that you can press these buttons here and it
turns out that A means ALWAYS so the fan always runs. Configuration number two is
in ALWAYS so when you're done you press off. Now the fan will run.
Now, don't mess with any of those other
configuration items. You will definitely screw up your air conditioner to the
point where it need the serviceman to come out. So C2 for automatic and be
sure to put it back how you found it so let's go into this again I'll show you
how to put it back. These two down, off twice, you gotta press it twice.
Okay, heat, heat we're on configuration item number two it's still how we set it
on A for ALWAYS and we'll just go through the through the buttons here
back to automatic and exit configuration mode. It's easy as that