How to unlock e zpass account pa
How to properly install your Ohio E-ZPass Transponder
0:00 / 0:00
now that you have your EasyPass
transponder and have activated it at
ohio turnpike org
it's now time for you to mount it in
your vehicle the ohio turnpike
recommends that easy past customers
mount their transponder behind their
rearview mirror on the windshield so
that it can accurately be read when
driving through the toll lanes mounting
your EasyPass transponder can be done in
four easy steps step 1 select location
for the transponder on the inside of
your windshield behind the rear-view
mirror and below any window tint step 2
clean and dry the area thoroughly step 3
remove the plastic tape from the
mounting strips on the transponder to
expose the adhesive surface step 4 place
the transponder on the windshield with
the e-zpass logo upright and facing you
while pressing down firmly if you elect
to not store your transponder on your
windshield at all times please make sure
to have your transponder mounted prior
to approaching the toll lanes so you do
not miss the read zone the read zone is
the area where the overhead sensors on
the plaza gantries receive your
transponders unique signal it's
important to understand that the read
zones on the ohio turnpike are longer
than most so in order to get a accurate
read every single time please mount your
transponder congratulations you are now
ready to drive the ohio turnpike with
your EasyPass transponder it's quick
it's easy it's easy pass
