[Applause]
so now i've got this little cool cabinet
lock it's only a two lever
this one the bolts at the front are at
the back
the leave as you can see at the back but
obviously if you
you're picking it you can't see the
levers because you need to pick it from
the front
so what happened was i've got my little
tension tool that i made
that's my little homemade tension tool
and i put it in i went to
tension it actually it's springy so if
you get that
obviously you're not on the bolt you
pull it forward
you know on the bolt but it's a bit
tricky to get your wire underneath the
bolt
so i found a way of picking it without
using the tension tool just
by putting a screwdriver in the top to
tension it so i'll just show you how i
did it
stick it in the vise and then i'll zoom
in
there you go so what i did is i've got a
screwdriver
and i just put it in the top edge there
you can see the bolt move in there so
i'll just tension the bolt slightly like
that
and then with me pick while i just went
in
and i just pushed up those two levers
one at a time and there you go
and we got it open so just
turn the screwdriver as far as you can
then pull the screwdriver out and then
just with your
your wire just push it across
so yeah cool little two-lever lock
which i've managed to get open just
using a screwdriver to tension the top
of the bolt yeah so that's it for now as
always thanks for watching
and i'll see you again next time try it
a bit