so today i'm going to show you guys how
to pick a lock
without much explanation
i'll do next video i'll go in depth of
what's actually going on how it works
but what you're going to use a small
flathead screwdriver this is about as
big as you're going to want to go
there's comparison to my finger
that's about the biggest you want to go
and a bobby pin and what you're going to
do is take off a little bead at the top
and we're going to be using the straight
part not this part
okay
and that's all you need so let's go as
you can see it's locked
um
there yeah so basically we're going to
do
is we're going to put pressure on the
plug so whichever way you would turn the
key is the way you're going to put your
screwdriver and you want to put your
screwdriver on the opposite end of where
the pins are so the pins are down here
so the screwdriver goes up here if you
get anything bigger than this uh you're
not going to be able to get this in
there so as you can see i'm using the
straight
straight side there's the jiggety side
i'm going to put in there and the key
here is to not use too much pressure if
you use too much the pins are going to
be stuck down
and if you use too little then they're
not going to be stuck in place and what
we're doing is we're getting the pin
stuck in the correct position
by putting forth on the plug so here we
go
just like that