In this video, we will show you how to transform a simple splitter into a powerful TV antenna.
With just a few simple steps and some basic materials, you can create a high-performance
antenna that will boost your TV's signal and give you access to more channels.
Get ready to say goodbye to fuzzy, low-quality TV reception and hello to crystal-clear images and a wide range of programming options!
turning a split into a powerful antenna for tv looking for 60
centimeters of cable with 60 centimeters we need this cable
let's cut it in half half of 60 30
We are going to locate these collectors that we have here
in the excellent [Music]
perfect watch very well let's go now
here at the end to remove 2 cm from one two centimeters
very carefully
[Music]
perfect observe we are going to remove a little here of the black rubber and we'll go
to wrap some tape
[Music] a little bit of duct tape and we're going to
place it here to avoid for the center conductor to make contact
there
very good then we are going to turn towards behind this part so notice that the
goal was that it will never enter contact like this
very good
let's now take aluminum foil
and up to here I have a little roll if you don't have derogatory you can use the
paper and stick it look and we are going to leave here approximately 5 centimeters
5 centimeters watch we are going to mark you here
to the bottom without here here we go cut
ok then what are we going to do the 5 centimeters that he had marked
let's wrap the aluminum foil in the body to function here as the
inner conductor [Music]
i
[Music]
and and
[Music]
ok here we are going to do a 90 turn degrees
ready same as here
and ready we are going to take our split and we are going to
turn into a powerful antenna just locating here
very good friend and in this way you can create or make or convert a split to
a powerful antenna for tv frequency 470 means so this one has
been your content today for you in your channel j in updated let's go with one
try thanks [Music]
[Music]
[Music] and
[Music]