long time not seen hope you're not mind
so let's get started with welcome to an
unusual can sink laptop look
[Music]
yeah I bought this locks were very cheap
of eBay and the seller told me that this
is an original can zing block and it
looks like a normal Cuba lock for
laptops and actually it is a pure luck
for laptops but when we look at the pins
we can see some weirdness going on so
usually these locks have 7 pins but this
has only five active pins we can see an
empty spot right here
and we can see a dummy pin there so this
is not a pin this is just a piece of
metal doesn't get depressed so nothing
to pick here nothing to pick there only
five active pins yeah I told you that
that I will do some destructive testing
on real computer hardware but not in
this video
in this video I wanna pick it free from
a little computer that I got from the
scrapyard
so let's see how this picks open in a
real world application ok here you can
see the little computer that I got from
the scrapyard and it has a Kensington
lock slot and other than that it's just
a piece of garbage my son used to play
with it but it's not working anymore
anyhow let's install the lock and pick
it free you have to insert the key then
you can cause the pins and the t-bar
here to align now we can insert it in
the slot close it and it's locked up I
try to pick it in the hands but it's
really hard to hold and give you a
stable whew I picked it open twice in
the hand but it's not a good setup for
the camera so let me clamp this in a
wise for you okay so here I can see my
setup I just clamped a little laptop in
my
I sent I hope this will give you more or
less stable few to the luck when I pick
it we can see the dummy pin here just a
piece of metal and the empty spot down
there there's a metal pole on top of the
inner plug that I can just avoid by
using the smaller the shorter distance
between the peaks like this hope this
gives you a good view
all binding really really tight let's
pin down below you can't see because of
the shadow it's really hard sorry for
the light a little - another pluck and
another channel pluck and think we are
very close
and we got it turned one one time but we
need to pick it another time to get it
free so there should be even easier
because there is one pin less to pick
which is at that spot or which is not at
that spot because here we have one
driver not covered by a heapin let's see
there is just pin down below you can't
see that is finding
this one is binding
I think that is already set the one down
there and you got a little turn on the
clock and we got it open so here's the
laptop block free or the laptop is free
from the lock it wasn't all that
difficult the most difficult part was
the clamping setup and the camera set up
to show it to you in an hopefully decent
manner yeah I found little luck that
picks open not very hard and it has this
weirdness of one empty spot and one
dummy pin now the dummy pin is just
where the slot is and I filed one key
down so usually you have this nose here
and a filed one key down so that has not
the nerves anymore
and now I can just use that to to
operate a lock also in this state so
usually sorry for that
focus so when you have to lock in this
state you cannot use the key with the
with a nurse now here we go
you cannot use the key with a nose tube
to close it again because the noose
prevents the key from going in but with
a key that has no nose I can just put in
the key and turn it all right all right
we see us again when it comes to more
destructive opening techniques that's
why I have this little laptop and until
we meet again happy picking and bye-bye
you
you