all right today I'm going to show you
how to break into a master lock done
lock it's pretty simple
- spring loaded caption right here just
push it in back and forth and what does
those teeth grab on to the tumbler here
I've already disassembled everything
taking it apart taking off the rubber
pad so you get an idea of how the
mechanics work on this so what I do is
go ahead and put it back together so you
can see what you got to do even though
it's not on a gun right now you can
still do it while it's on the gun that's
the whole purpose of the video what I
want you to get understanding of how it
works so while it's still on the trigger
guard you can get it off so we get get
you a screwdriver no bigger than this
about 3/16 of an inch wide stick it
through the trigger guard get it down
there where this is going to disengage
that lock
remember it's spring-loaded so just get
it down there and get it off the
tumblers it might be a little bit better
view for you there to see up in there
just get on the top of it and press it
off getting bring a screwdriver in
behind right here or these teeth grab on
to that tumbler so all you're doing is
getting your screwdriver ran through the
trigger guard - just about this point
and pushing back and that will release
the tumbler if you can see the movement
or not but that's all you do just push
it on back
and that will get your trigger lock off
your firearm if you lost your keys or
anything like that or if you bought of a
gun that has one on there and the owner
don't have keys to it that's all you do
get in there and pop it off and be good
to go
then you have your gun back and you buy
a new lock