hey guys tassman here so today i tried
to unlock my deadbolt and it didn't work
it wouldn't go
back so i am literally stuck in the
house i'm not gonna take a sawzall and
cut this off or remove this trim
i'm gonna take this plate off and try to
unlock the mechanism inside here
so let's get at it first thing i'm gonna
do is
i'm gonna remove it when using phillips
screwdrivers
i want to use a phillips screwdriver
because i don't want to strip any
of the threads right in here some people
won't use the impact
or a automatic one but i wouldn't do it
it's one screw camera second screw
right here so after removing the plate
[Music]
you should see that now you're just
gonna
pop this out which is the other side
perfectly okay so don't worry about that
you must take your screwdriver in there
and pop the other side up
all right so that came off normally you
just stick this
your phillips in there and you're able
to turn it but mine
is kind of stuck still so what you want
to do is
there's a clip below here that you want
to remove
that locks it in place so
i can find that clip to black clip
oh there it is here's that black clip it
came off
and what you want to do is here's the
top right here and use your
using your flat you want to push that
back hopefully
that unlocks your door
and there we go that's it
uh what you guys also want to do is use
wd-40 lubricate it
you know there's a lot of friction going
on
with these metal parts but
that's it
but one after i did that look what
happens it just
goes smoothly now
just like so
all right guys remember to subscribe
like and comment in the section below
let me know if this helped you guys out
see you guys later
[Music]