How to unlock a key holder
(642) Master Lock Combo Box - EZPZ to Open! (JUNK!)
hey guys Wayne Winton sent this to me
from Colorado asked me to show you how
easy it is to get into these master lock
combination locks there's no model
number that I can see anywhere on this
thing but doesn't matter they'll you'll
know it when you see it little weather
window here you pop it open and that
exposes the combination now it's
unshielded so you dial in your
combination and then pull this little
lever down and then you get in there you
can see it's locked
doesn't come out them let's see if we
can get into all you really need is a
knife and this one is I think is the
thin piece of steel this is 12,000 you
can make one out of feeler gauge but
very thin and what we're trying to do
we're going to stick it right it beside
the wheel and when we turn that wheel
we're going to find the the flat spot on
the wheel so what we're going to do is
just I'm going to push it in there and
then I'm going to pull it this way and
try to determine when we hit that flat
spot and you'll see it move very
slightly as we get to it hopefully it
doesn't get hung up too bad like it is
now
come out of there we check that for now
okay there's a flat spot you saw it kind
of went like that and that tells me it's
writing on the flat spot so we got a
three there let's turn this one again
just trying to find the flat spot we're
just trying to line them all up so we
got something to work with and there we
go it's a zero
and then maybe shot flop over there see
we can get it to show a little better
there's a not flat spot and then it kind
of rides in there to the flat spot so
there's a five and the last one don't
put too much torque on otherwise it'll
bind it there we go
so that's really a deep one right there
so we got two five zero three so let's
see if that lined it up in this case it
doesn't but what we know is that the
flat spots are lined up now we've just
got to figure out where they need to be
rotated to so two five oh three and what
I'm going to do is I'm just going to
rotate them all one click so we got a
three six one four get that lined up and
we'll try it there
nope about a four seven two five and
there we go
lever comes down comes open we got a key
in here I don't know what it goes to
I'm sure Wayne will send me a lot for it
but anyway that's how easy it is to get
a master lock nothing to it all you need
just a little thin piece of flexible
steel to find the flat spot on these
unshielded wheels get what you pay for
guys thanks for time stay safe stay
legal
