so today I noticed that often is not
working and also I say have you opened
the door there's no light either and if
you want up for the model number you can
look under here can you see the model
number here so first of all we're gonna
do is I'm gonna pull out there pull out
of it and then plug and plug it and
start taking out the Savior brain away
they ordered apart on Amazon for like
140
I'm going to pluck it first so I think
this couple school you need to take out
do this then 1 2 3 4 5 and sit
[Music]
just come by off see the baths gonna
look like this so basically now I'm
going to take out this connector here
and loosen this rule here in this school
here in the school with this rule for
this one I think you just poured out
slowly it just come out snuff them to
push and it just come by out
and in there is but in general it is
pretty hot usually is pretty stuck in
here to you to pry a little bit but I
took this our last time so that's why
Kim the camera out but it is not you
just I'd say it just poured out you to
just come way out because what happen is
just just what happened it just sticky
around here
that's what on here this was kind of
hard to pull out so here's the old one
here's the new one
so what we're gonna do now is going to
take out this face cover and put on to
the mean one but before doing that I
just clean this out first
so I gotta clean ready and so now we're
gonna take this cover off dump try to
just dumped I'll just pull this up
because you can crease it up break it
just get some smooth and just scrape it
out
it is
you feel better you see if you still it
was still sticky just now put it pushed
onto the new one but if you feel sticky
enough to do add some double sided tape
ISM
so I'm now ready put it back on
so now we can put that other pin of
background oh wait before I pay no
pepper for this back on
she sure is seeing good before you put
them back
so I'm just going to skip the video of
type of sir tiny thing cuz I think you
got now to do it now where I need
someone screwed things up before so now
I'm gonna plug it back in you see
disrepair open up so that's good to beat
the noise so I can tell it's good now
it's working now because their powers
are now with a clap is working
that's why I'm gonna show anything work
before I have to do anything that means
good and we now I'm going to set the
clock so to set the clock we can do is
push the clock button this is the
adjustment for the time
yeah right now is 28 now just keep
holding it down after that deep push
start you know this belly