Hi my name is Jackie and today I'm going to be talking to you about
how to reset your KryptoFlex Combo Cable lock.
The KryptoFlex Combo Cable is a great option as a secondary deterrent.
It can be used to lock up your front or rear wheel in addition to using your U-lock or your chain lock.
It can also be used when transporting your bike on a bike rack.
Just remember these simple lock-up tips: Always lock up in a well-lit area,
keep your lock off the ground when locking up
and also don't lock up your bike to anything that can be lifted or cut.
So before we begin there are a few terms that you should be aware of.
Your reset window, .
your reset dial,
your lock post
and your guide points.
Your new lock is factory preset to open at 0005.
If it won't open try 0000.
Open your lock by aligning the factory preset combination to the guide points
and then pull out the lock posts.
With the reset dial facing right, turn the dial one-quarter turn clockwise until it stops.
The reset window will change colour from black to red when in reset mode.
With the reset dials showing red turn the dials to set your combination. Such as your birth year.
Make sure that all the dials are fully aligned.
After setting the combination turn the reset dial
one-quarter turn counter clockwise until it's back in its original position.
The reset window will turn from red to black.
You want to verify your new combination before using your lock.
Insert the lock post all the way into the locking port but do not turn the dials.
Pull out the lock post and the lock is now ready to use.
The reset operation is now complete.
Repeat steps one to five anytime you wish to change a combination.
For more information on our products make sure to visit kryptonitelock.com.