girl welcome to the all instructional
videos on the instruction day today I'm
going to show you how to unlock a barrel
cylinder with just everyday household
items first I'm going to unlock the
cylinder and then I'm going to show you
how it works and what items you've been
used to actually perform this procedure
you'll notice I applied pressure
backwards on this screw inside of this
barrel cylinder is a spring-loaded
mechanism that when it is released it
forces these ball bearings out thus
creating the lock that once inside this
housing you're not able to remove so in
order for you to release the seal the
spring-loaded mechanism inside here and
allow these ball bearings to go in
you'll need a device that goes inside
the actual tube of this barrel
this is a normal metric two-and-a-half
inch screw you can probably get out of
your junk drawer what you'll do is
you'll insert the screw into the female
receiving end of the barrel pushing it
all the way down into it you'll notice
when it stops you'll then screw the
screw in so that it actually connects to
the spring-loaded mechanism after it's
actually connected to the spring-loaded
mechanism you'll know that it has
tension on it this tension when applied
outward is what's going to allow these
two ball bearings to release thus
unlocking the barrel lock
again this is a two-and-a-half-inch
metric screw that you can probably get
at any hardware store maybe even in your
junk drawer you'll notice that all the
other instructional videos on YouTube
showed you a professional tool to unlock
this and just a little bit more
information on the barrel lock itself I
hope this instructional video was
helpful I hope you find it better than
any other video on YouTube and if you'd
like more information about this
procedure or any other instructional
videos from programming your remote
control to tinting the windows on your
car please email us at the email
provided we look forward to hearing from
you have a good day