step one make lockpick and never using
two hair pins if you don't have a kit to
create the log pick bend one of the hair
pins so the ends are 90 degrees apart
and remove the rubber caps from the ends
then slightly bend one of the ends of
the hair pin upward so the end is no
longer perfectly straight to make the
lever then the second hairpin at the
point that's about 0.5 inches 1.3
centimeters away from the curved part of
the hair pin once you've made a
90-degree angle stop bending the hair
fit to use a pair of needle nose pliers
to help you bend the hair pins
if you're having trouble step 2 - analog
tech and lover out of two paper clips if
you don't have hairpins to make the lock
tick straighten out half of the
paperclip leaving the other half as is
then bend the onto the straight in town
for the paper clip upward slightly to
make the lever straighten out the second
paper clip almost all the way leaving
one of the pen curbs at one end of the
paper clip bend down the band curve
until it's at a ninety degree angle from
the rest of the paper clip 3 step 3
insert the short side of the lever into
the law fold the long end of the lever
between your fingers once the lever is
inside the law press the long end of the
lever in the direction you would turn
the key to unlock your mailbox while
you're picking the lock continue to
press the lever in this direction to
apply pressure to the barrel of the log
without the pressure on the barrel you
won't be able to pick the lock open for
insert the done end of your log deck
into the log inside the law there are
five pins that need to be raised to the
same height and order for the barrel of
the lock to turn and unlock the law you
will use the bent part of the log deck
to lift the pens to the right height
when you insert the lock back into the
law keep it close to the opening of the
law that's where the first pin you'll
need to raise up his 5 step 5
push up the first pin in the lock to see
if it sees these pins our pens that
prevented barrel locks from rotating and
unlocking to find out if the first pin
has ceased push up on it using the end
of the long vector when you feel
something push up you found the first
pin if the pin pushes up without any
resistance it's not seized if it's not
seized push that top one continue on to
the second pin if it has ceased wiggle
the lock back up and down to force the
pin up above the barrel
six you'll hear a click by never
received pin has raised up all the way
step 6 continue lifting the pins up
until all five have been raised each
time you lift up a pin with the lock
pick push the lock back into the lung
Cal it'll further to find the next pin
if you encounter a seized pin for is it
up when using the lock pick
make sure you hear a click top do you
raise a sieve and before
you move on step 7 use the lever to
rotate the barrel to unlock the lock
once you've raised all 5 pins the barrel
of the lock should immediately rotate
since you're applying pressure to it
with the lever finished rotating the
barrel all the way with the lever until
the lock is unlocked to remove the lever
and a long trek from the lock and open
the door to your mailbox 50 lights this
video then give it a thumbs up and don't
forget to subscribe our channel thanks