okay guys so today we have a TSA 0:07
lock from a Samsonite luggage and that
will show you how to pick this lock okay
now we have the release button which is
this here and that's also the for the
TSA key we have the three dials we have
the TSA approved symbol and then we have
where the zippers will go so this
release button you usually be able to
slide it towards the dial so as you can
see it has a small arrow over there so
towards the dials and right now I have
this code I'm gonna go ahead and show
you how it would open you see now if you
don't know your code and you can't find
what the code is and you're logged out
of your luggage this is what we're gonna
go ahead and do okay guys so today I
will be using this just to guide us to
what we're gonna do okay and so you have
your three dials and this is where all
of our attention is going to be so we're
gonna be using this so we're just gonna
go ahead and open it okay and now you
can zoom in with your camera if you're
using your phone and if you happen to
see right here there's a silver or a
metal cylinder that's where we're going
to be looking at every tile has it as
you can see it here you see that okay
and this one does as well so we're gonna
be looking for an indentation on that
metal part there some luggage locks will
have that but it will be a plastic so
it's a little bit harder but you will
still be able to see it with your
flashlight or a very underrated lighted
area um so here's what we're gonna do
you see that and that's all we're gonna
be looking at you see it now you see
this right here
you
see that indentation it's not anywhere
else you'll be able to see that
everything else is fine so when you go
back to that indentation there you see
it you see how it looks it's not shining
it looks like there's a gap there that's
what we're looking for you'll go ahead
and stop at that number should be
aligned now we're gonna go to ahead and
do the same with this one
okay so here it goes I turned on my
flashlight and just so you can see that
you see it it just looks like a metal
cylinder so that's what we're gonna go
ahead oh you see right there there it is
you see shiny shiny shiny shiny shiny
shiny and then you get to that number
there it is I accidentally moved this
okay now we're gonna go to this one as
well we're gonna do the same thing so
you see the shiny there okay so you're
gonna move it and boom there it is okay
so it's that final five five okay so now
now that we have it all set all the
indentations are aligned we're gonna go
ahead and try to open the luggage okay
so it didn't open so if it does not open
this is where we're gonna go ahead and
do you see that I just added one number
we're gonna go ahead and try to open it
okay we're gonna try it to open it does
not open we're gonna go ahead and try it
again again
okay you see and that's your code okay
guys so once you have found your code
the way to reset it will actually be to
push this okay now the reason why I'm
pushing this is because there's no reset
button anywhere else so did you see this
red dot that means that this is also the
reset button so you will push it and you
keep it pressed and then you will change
the code
whichever one you desire okay once you
have your code you'll go ahead and
release it now that will be now your
code if you go back to zero zero zero
which was the initial code it won't open
anymore and it won't open at any other
code okay so it's going to be just at
the code that you have set it to if you
do lose the code you're gonna have to do
the process all over again so make sure
you keep the code safe other than that
that should be all that you need if you
want to reset your code and you already
have a code then you would need to start
with the code that you have do the same
thing change the code whichever one you
like and then release but you have to
start with the code that will open the
lock all the time okay have a great day
guys