hello class
my name is mark with vaughn load today
i'm going to show you how to get into
your car when you lock yourself choose
you'll need a shoelace for training
purposes we'll get a shoelace full body
link and the optional tool will be a pry
tool such as a screwdriver or a pin
whatever you might have a hand at the
time training video there would be two
segments the first time it would be a
full process where I run through the
whole motion second segment will be me
showing you step-by-step and exactly
what to do
you might have noticed throughout the
whole video that we did our training on
the steak lock that's because this trick
only works on the steak clock
we'll start off by identifying the
middle part of the string
the way to do that is grab both ends put
them together
go on to the other side
and put you put the middle of the loop
on T hand like that
from there we'll grab the back part of
the string loop around the first the
front part of the string grab with your
thumb
and then come back here and grab the
back part of the string
grab it let it go and tie it together
once we have our loop don't don't
tighten it too much at this point what
you want to do where you pull one this
one of the ends so you can adjust it and
measure it with the three fingers just
like that after that you'll grab both
the loop and the two two ends and
tighten it as tight as you can you want
to get as high as you can because you
need to keep that night but not as tight
as you can because of the way you want
to maneuver and manipulate it once you
get your knot tight I'm going to locate
the rubber guard and the roof of the car
right here with that you're going to put
your not in between both
this is where your optional tool might
come in handy where you might have to
pry or push not in once you got the knot
inside you're going to grab the two ends
like if you're going to floss your teeth
once you have that slowly maneuver and
manipulate the string in there the way
to maneuver manipulate you're not to
this to the lock is by coarse floss and
you're using your right hand you lower
the knot and then to make the knot move
in a circular motion you lose both ends
and make a circular motion on your own
this is a part where you need the
biggest patience and the most practice
at
No
once you successfully got in the loop
into the lock you want to tighten you
want to tighten both in so the light
because the loop becomes tighter and
tight as hard as you can
once that's once that's done all you
have to do is pull up you successfully
successfully unlock the car thank you
for giving me your time and with
practice we will surely get the skill
and be able to avoid this problem