hey gang Mike with swimming pool
services here today I want to teach you
guys how to operate the controls on the
new utopia utopia series that Cal there
at spas is offering so the model that
we're using here is a Tahitian and what
I want to show you guys is just how to
operate the various functions that we
have in this spot so when we first walk
up to our hot tub we're always going to
show a screen that's not illuminated and
that's simply to conserve energy as soon
as we hit any of the buttons you're
going to see the screen pop up and so
what we're looking at here is our main
menu and what it shows us is the current
temperature of the water in the center
of the screen and then we've also got a
few menu options in each of the corners
right now we're showing the top left is
memory on the right all off and then we
have a queen function as well if you
look at the bottom of the screen you
notice a few icons it says ready and
power down there and what that's
indicating is that with the ready icon
it's ready to go ready for us to use
it's our set temperature and the power
is indicating that yes we have power and
all our functions can be activated
you'll also notice the flashing icon
there it's like a little light and
that's just indicating that the lights
are currently turned on so on the top
side control panel here we have eight
buttons we have four buttons on the
outside each of them have a word on them
and we refer to those as hard buttons
which means that they just have one hard
function whatever word it says on the
button is pretty much what it does and
then we also have four buttons inside
that you not have any words written on
them and those buttons we refer to as
soft buttons and the soft butt means it
has a soft function which can change as
we get into the different menus here so
each of those buttons the function they
have will correlate with whatever menu
option it gives us in the corner of the
screen so so we can jump right in here
the first function I'd like to show you
guys is the jets so if we hit that chest
button does a couple things it brings up
the jet screen here where we can turn
all the Jets on and off and also you'll
notice it turns that first jet pump on
low speed so we can see right here that
jet too is on low if we hit the soft
button correlated to that it turns that
pump on high
and if we hit that button again it will
turn it off all together and so we could
do the same thing with jet pump one that
one is a single speed pump so we can
turn it on high or we could turn it off
and then we also have a button for jet
max and if we hit that it fires up all
the jets in the hot tub
so we got everything on full-blast there
and the way I was able to turn them off
is with the last option we have down
here for jets off we can hit the jets
the soft button for jets off turn
everything off in one fell swoop and so
that's our jets menu pretty easy stuff
then to go back to the main menu all
I'll do is hit the back button on the
bottom right here and it takes us back
where we started the next menu we'll
look at is the lights menu and so if we
hit lights it gives us the ability to
customize each of the different zones of
lighting that we have within the hot tub
so we have lighting for the topside
underwater the waterfall and the
exterior lights and as an example just
to illustrate it we'll only do the
underwater lights here so if I hit the
soft button for the underwater lights it
takes us into a submenu with a few
different options we've got a dimmer
collar selector we could turn those
lights off or we could go back to the
lighting options which just takes us
back to that previous menu so for the
dimmer right now it's on 3 which is the
height that goes if I hit that button it
goes down to 2 and the lights have
dimmed a little bit if I hit it again
down to 1/3 the dimmer and the last time
those underwater lights are now turned
off so we have the ability to brighten
or dim those lights or turn off
different sections if we wish to then
with the color selector right now we
have the loop on so I don't know how
will you see it so those lights are
constantly changing colors right now but
if we wanted to we could hit the soft
button next to the color selector and if
I wanted to I could pick blue or in the
go or I could scroll if I like emerald
better it gives me the ability to scroll
and then I can pick whatever color I
want it to be right now it's on Ruby or
now I'm back to Luke so with the loop
function all the lights that are set to
loop are looping on the same loop so
they're all going at the same consistent
rate and then if I wanted to I could
turn those lights off as well and you'll
notice because we're in the sub menu for
the underwater lights that that's the
only thing we're impacting and then if
we wanted to we could hit lighting
options to go back or we could even just
hit the back button takes us back to the
previous menu and so that functionality
we looked at is the same for all the
different lighting sections of the
hottub
so then we have an options menu and
within the options initially we just get
two choices we have temperature and
setup so we'll go into temperature first
that's pretty easy so for temperature a
few different things we can do here
we've got a temperature lock so if I
wanted to if I want the top subset at 97
degrees and I don't want anybody to come
in and accidentally change it I could
turn that temp lock on and that way it's
going to keep that temperature set where
I want it if I wanted to change it from
Fahrenheit to Celsius I can do that here
as well but then over on the right
there's an up and a down arrow and so
these two soft buttons here are for
turning that temperature up and down if
I so desired and so it's kind of nice
having the temperature as submenu
because you nobody can ask really
accidentally change the temperature you
have to go into the menu to actually
adjust it so the other option we have
here is set up and we've been set up we
have a number of different things we can
do we have a spa lock a summer timer
brightness or more then more we've got
an auto clean cycle language and auto
exterior lights so I'm going to head
back take us back to first set of menus
so first we'll go into spa lock with
spot lock if we turn that on what that
does is gives us a little bit of
security in that nobody can use any of
the functions in the hot tub without the
proper combination to unlock it and so
right now I can't go back I can't do
anything with my life my jet I can't do
anything until I enter the correct
combination to unlock the spot and the
way we would do that is with the options
and lights button and so I just held
those two buttons down for about three
seconds and that's what unlocks the spot
so now we have all of our functionality
back so I can go back into that options
menu and back to setup and so now it
shows us the spot lock is off next we
have a summer timer and a summer timer
given that we're in the state of
Wisconsin is one of the only functions
that I don't ever have my customers use
the reason we don't use it is because
our summers usually are not brutal
enough to where we have to worry about
the spa being too warm the summer timer
is really designed more for climates
such as California Arizona Texas places
where it's so hot that we now have ways
to cool down our hot tubs if we need to
but for us here in Wisconsin it's never
really an issue so not something that we
ever really use with that summer timer
with the brightness however if we wanted
to let that simply sorry turned out on
me what the brightness controls is just
the brightness of this screen
seeing those are getting dimmer and
dinner or at the brightest right there
and then we can also do more for more we
have language which we usually just
leave alone Auto exterior lights if we
turn that function on what that would do
is every day at whatever time of day we
turned it on the lights on the exterior
of the spa would turn on automatically
so you can see the lights here there's a
light built into each of the corners on
these spots and so if I were to turn
that on right now every day at this time
those auto exterior lights with chicken
and they stay on for six hours that's a
lot of people will use that if they want
to get home from work and see this
follow it up and it reminds them all -
lets get out there and enjoy it tonight
so that's a very popular function that
we offer and then we also have an auto
clean cycle so similar to the auto
exterior lights in that if I turn that
function on what that's going to do is
every day at this time the Jets will
automatically pick on
and the idea there is it just gives you
some added circulation of the water
added filtration it just helps to keep
the water cleaner the more we're able to
push that water through the filter the
less we typically will need with
chemicals and other maintenance so the
auto clean cycle is a very popular
function and certainly doesn't prevent
people from getting in it's just the
Jets going through an automatic cycle
pushing the water so if somebody were to
come out here and the chats we're on
from Laurel clean cycles not going to
stop you from hopping in you can turn
the other jets on interrupt the cycle
escape too as well
and so that covers the menus that we
have with the hard functions the last
two components that we have are the soft
options on the main home screen so we'll
start with the all off function the all
off is really nice because if we hit
that button what it does is it turns off
everything in the hot tub and so if we
have jets on lights on it just ticks
everything off I'll give you a
demonstration I just want to turn
everything on quick
okay so right now everything in the hot
tub is going everything is running full
blast
if I hit that ball off button one button
turns everything in the spa off
so all adjusts the lights everything it
kicked off which brings us to another
really neat function and that's in the
top left-hand corner here we have a
function called memory and what the
memory button does is it takes us back
to the last setting we had active when
that all off button was pushed so here
if I use the memory button it's going to
turn everything back on the way it's
applied
and so what a lot of people do as far as
our customers go is they really only
ever use those two buttons and when it
comes to using the hot tub because they
hit one button for memory to bring all
their Jets to my life settings back to
the desired the desired setting and I
hit all off when they hop out so really
great way to just be able to press one
button and get in press one button when
getting out last option we have here is
the clean cycle and with the clean cycle
what that simply does is it runs that
jet pump on high-speed for 10 minutes
and then it would automatically shut off
and the idea there is if say I'm adding
some chemicals to bounce or treat the
water it's going to be able to disperse
and move those chemicals around for 10
minutes and then it will automatically
shut off or another instance where
somebody might use that as if they had a
whole bunch of people in the hot tub and
taking food or beverages or maybe
something that spilled or introduced to
the hot tub that isn't typically there
we could run that clean cycle after
everybody hops out and that would just
keep moving the water and trying to
filter out anything that's not supposed
to be there so that covers the
functionality that we have available
with the topside caldera utopia series
spas on the Utopia series we do have one
more option for control and that is over
here
we have what is called an auxilary
control and with the auxilary control we
have the ability to access all the same
functions that are available on the
normal topside we can turn on each one
of the jet pumps as well as the lights
so if I was in the hot tub long enough
and all those features shut off if I
wanted to I could reach over and turn
the Jets back behind
or
if I wanted to I could turn them back
off if I didn't want them for whatever
reason I can turn the lights on as well
if I wish and if I didn't want the
lights or if I wanted to dim them I
could keep hitting that lights button
and turn them off that way too so a
really nice feature on the caldera
utopia series is that we can control the
spa and all of its features from more
than one spot in my hot tub so that's
all I have for you guys today I hope
this video was helpful and if you have
any questions about controlling your
utopia series spa that weren't answered
in this video don't hesitate to give us
a call to six two five four four five
five zero zero or you can check our
website as well and we're able to offer
you guys a lot of resources for
understanding how your hot two works
thanks guys