okay today we're going to show you how
to update the League of GT device and
the steps are the same no matter which
GT device you have whether it's gas
diesel and me Toyota etc so the first
thing you're going to need to do is
download the update agent and to do that
go to our website www.drinklab.org the
update agent go ahead and click on it
now with the bottom in Alaska if you
want to run the update agent go ahead
and click run certain nano viruses and
what not will sometimes tell you it's a
virus but go ahead and let it or approve
it to download and click install okay so
here popped up a Windows you know asking
us if we want to allow it to make
changes or install on the computer go
ahead and click yes
okay now let's install click finish once
it fires up its going to look for a
device we do not have one plug-in right
now I'm going to go ahead and take the
SD card out of the GT and I'm going to
put it inside a SD card reader alright
I'm going to go ahead and plug the SD
card in using the adapter and the update
agent should recognize the device ok it
will pop up an autoplay usually you can
go ahead and close that says it's an
unknown device we're going to go ahead
and select it it's the BD card so it's
the bully dog SD card click select
device it doesn't automatically
recognize which device you have go ahead
and manually select it this one is a
four oh four to zero so go ahead and
click download and upgrade the first
thing it will do is it will download the
device binaries squared and wait for
this to finish again this varies on how
long it takes depending on your your
internet speed with broadband it's
usually pretty fast
you
okay now the update agent is loaded the
latest files onto our SD card what we're
going to go ahead and do is take the SD
card out of the computer and put it back
in the device
okay now I'm putting the SD card in the
device the contacts face up if you're
looking at the screen and push it down
until it locks into place
I'm going to go ahead and power it up
via USB and you can power this up at the
computer or in the vehicle it does not
matter okay in the computer you're going
to have to exit USB mode by pressing key
number two the second one down on the
left
Oh
Turner's going to power up and since
this device has never been installed in
a vehicle first thing we're going to do
is we're going to go into the menu and
select change vehicle this one is going
to go into a 6-litre four so we're going
to select 403 Doh seven six liter and
change the vehicle yes
okay if you are updating a device that
already has the vehicle selected say you
took it out of your vehicle and you're
running an update from home go ahead
next USB mode after you finish updating
go into the main menu then you're going
to scroll all the way to the very bottom
where it says update firmware on the gas
devices it will say update GT software
go ahead and select that and it'll ask
you if you want to do it for the
application that's currently selected
just go ahead and press Yes then we'll
go ahead and load that new update that
you put on the SD card into the memory
of the tuner
okay I'm going to go ahead and
double-check that the update took the
update agent told me the version was
1200 right there on the update agent
screen so I'm going to go ahead and go
into show settings and verify that
that's what the GTA is currently showing
yep software version 1.2 point zero
point zero so it's updated and ready to
go