brought to you by 1a auto calm your
source for quality replacement parts and
the best service on the Internet
hi I'm Mike from 1a auto I hope this
how-to video helps you out and next time
you need parts for your vehicle
think of 1a auto calm in this video
we're going to show you how to replace
the power door lock switch on this 2011
Silverado 1500 this is the LT model the
LTZ model will be a little bit different
and the only tools you'll need are a 10
millimeter socket and ratchet and a flat
blade screwdriver we're going to show
you a driver's side passenger sides
generally the same also the same for GMC
sierra SLE
using a flat-blade screwdriver you just
want to pry off this pull handle trim
panel now you have access to these two
ten millimeter bolts you just want to go
ahead and remove those
and you want to pry up that switch panel
and just disconnect these harnesses it's
just pushing the tab on the top and pull
back on them for this lead you want to
there's a tab on the back of it you just
want to pry out that tab and then the
clip will actually pull up and out while
pushing on the button side of the switch
pry the tabs that hold the switch into
the bezel and as you push and pry the
switch will pop up and out you can see
the old one on the bottom the new one on
the top from 1a auto they're exactly the
same will fit the same take the new door
lock switch and just push it into place
on the switch panel you just want to
reconnect those harnesses
[Applause]
then you just want to push make sure
your harnesses are pushed in there and
push the switch panel right down and
then we'll fast forward is he puts that
pull handle back into place replaces the
two ten millimeter bolts and the trim
panel we hope this helps you out
brought to you by ww1 ayato comm your
source for quality replacement parts and
the best service on the internet please
feel free to call us toll-free 888 eight
four four three three nine three where
the company that's here for you on the
internet and in person