fire extinguishers are required to be
inspected monthly here are the steps to
perform a monthly visual inspection
ensure the operating instructions are
clearly visible and face front work next
make sure the needle on engages in the
green signifying that there is no
pressure leak check the tamper seal in a
pull pin to ensure they're in place
the tamper seal protects the pull pin
from being accidentally pulled out check
the body of the extinguisher for any
dents corrosion or signs of leakage
check the discharge hose for an injury
rod or blockages at the nozzle
unscrew the hose and inspect the opening
for any signs of discharge
also check the student section of the
hose for any blockages
turn the extinguisher upside down to
fluff the dry chemical this stops the
extinguishing agent from packing up at
the base
finally initial and date the monthly
inspection card and secured to the
extinguisher remember all extinguishers
are to be visually inspected monthly
this ensures a safe working environment